旧型号 电机控制器
| Image | Model | Number of Axes |
Driving Motor |
Driving Current | Micro-Step Division | Communication Interface | Manual |
.jpg) |
CRUX-A | 2 | 5-phase stepper motor | 0.35A～1.48A/phase | 1,2,4,5,8,10,20,40,80,16,25, 50,100,125,200,250 |
RS-232C USB |
|
 |
SC-021 | 2 | 5-phase stepper motor | 0.35,0.75A/phase | 1,2,2.5,4,5,8,10,20,25,40, 50,80,100,125,200,250 |
RS-232C | |
 |
SC-210 | 2 | 5-phase stepper motor | 0.35A～1.4A/phase | 1,2,4,5,8,10,20,40,80,16,25, 50,100,125,200,250 |
RS-232C GP-IB |
|
 |
SC-410 | 4 | 5-phase stepper motor | 0.35A～1.4A/phase | 1,2,4,5,8,10,20,40,80,16,25, 50,100,125,200,250 |
RS-232C GP-IB |
|
In the case of the SC series, a backup battery is used for keeping the system
parameters when the power is off. If the system parameters cannot be kept in
memory because of the battery degradation, the system of SC controller must reset
at the start-up for using the controller normally.
Manual for Replacing the backup battery of SC series
Manual for Backup method of system parameters